Availability: | |
---|---|
Quantity: | |
MD1000
Lihui Audio
Audio
Frequency response : 20 Hz - 20 kHz ( +0/-1 dB) @ 1 W, 8 ohm
S/N ratio : 100 dB (A weighted)
Crosstalk separation : -65 dB @ 1 kHz (4 ohm)
Input sensitivity @ 8Ω : 0.775 V / +0 dBu
Max input level: 2.7 V / +10.8 dBu @ 32 dB gain
Input impedance : 10 k ohm balanced
THD+N : < 1% from 0.1 W to full power (typically < 0.05%
Damping factor > 200 @ 100 Hz
AC Mains Power:
Power supply: 115V/230V 50-60HZ
Construction
Dimensions (L x W x H) : 280 mm x 148 mm x 83 mm
Weight : 3KG.
The characteristics of the MD1000 Audio Amplifier.
* High Power 2-way
* High Power Single Subwoofer
* Two-Channel High Power Applications
* High Power Sub+Satellite Systems
* Short-circuit/overload/high frequency output protections
* Clip limiter, permanent signal limiter
* Output for passive speaker
* Line out for Active speaker
* Temperature controlled internal fans and output
* Optional DSP boards
* THD under 1% at RMS
* Efficiency and robustness, always and everywhere
* Maximize performances, minimize consumption
7.DSP PC adjusts the USB interface, with a dust cap to prevent foreign matter or dust from entering
8.Short circuit, overload high frequency output protections
Audio
Frequency response : 20 Hz - 20 kHz ( +0/-1 dB) @ 1 W, 8 ohm
S/N ratio : 100 dB (A weighted)
Crosstalk separation : -65 dB @ 1 kHz (4 ohm)
Input sensitivity @ 8Ω : 0.775 V / +0 dBu
Max input level: 2.7 V / +10.8 dBu @ 32 dB gain
Input impedance : 10 k ohm balanced
THD+N : < 1% from 0.1 W to full power (typically < 0.05%
Damping factor > 200 @ 100 Hz
AC Mains Power:
Power supply: 115V/230V 50-60HZ
Construction
Dimensions (L x W x H) : 280 mm x 148 mm x 83 mm
Weight : 3KG.
The characteristics of the MD1000 Audio Amplifier.
* High Power 2-way
* High Power Single Subwoofer
* Two-Channel High Power Applications
* High Power Sub+Satellite Systems
* Short-circuit/overload/high frequency output protections
* Clip limiter, permanent signal limiter
* Output for passive speaker
* Line out for Active speaker
* Temperature controlled internal fans and output
* Optional DSP boards
* THD under 1% at RMS
* Efficiency and robustness, always and everywhere
* Maximize performances, minimize consumption
7.DSP PC adjusts the USB interface, with a dust cap to prevent foreign matter or dust from entering
8.Short circuit, overload high frequency output protections